SS. Dentla Medical Steam Sterilizer Sterilizition Dentist Disinfection Machine

Description

SS. Medical Steam Sterilizer Sterilizition Dentist Disinfection-【2-5Day to USA】
Detail
510(k) NO. K122774
18L 110V/220V 900W Medical Steam Sterilizer Dental Lab Sterilizer Equipment
Model: 370133 370134
Specification:
CHAMBER SIZE : stainless steel #304 ; 18Liter ; (Ø)25×(D)35 CM
MACHINE SIZE : (L)58×(W)39×(H)36 CM
POWER : AC110V/900W/8A ; AC220V/900W/4A
TEMP/PRESSURE : 121℃/0.12Mpa ; 134℃/0.22Mpa
STERILIZATION TIME : 25Min / 6Min
SAFETY : Heating-over protection ; safety valve
TEMP CONTROL DESIGN : chip control
OPTIONAL ACCESSORIES :
tray basket × 1pc ; tray holder × 1pc
Sterilization tray × 3pcs ; steam exhaust pipe × 1pc
Safety equipment:
1.Pressure adjustment: adjust the inter pressure, if over standard value automatic vent
2.Avoild overheat protect device: when inter temperature overheat, power break electric current automatically.
CAUTION:
1.After the completion of disinfection。Please to wait for 10 minutes.
Before open the DOOR(Do not close the power switch and close the steam
emissions switch).
2.Before each use.Must supply water 800ml。(Distilled water is the bast).
3.Please close steam emissions switch.Before In the disinfection.
4.Do not use any corrosive or chemical water as the disinfection.
5.Do not share the same electricoutllet with other electrical apparetus.
6.Please pay attention to correct voltage and frequency.
7.Connect steam exhaust pipe with the steam vent，Before operation.
Package Includes:
1*main body
Gift:---Curing light
Features for Curing Light
- Wireless dental curing light with charging
- 5W big power LED
- With a maximum more than 1500mW/cm²
- Constant light intensity. The solidification effect is not affected by the consumption of remaining power
- Elegance design, very convenient for operationv
- Noiseless operation
- Low battery alert
- Three working models: strong, gradually strong, flashing
- Use import LED, big power, intensity and longevity, save energy
- The special design of charger base can be also used for holding the handle
- It can solidify 2-3mm deepness in a few seconds
- Can be used Worldwide 100V-240V
- With blue high sensitive brightness, can cure the resin which the wavelength of 420-480nm
- Import SMOS components, stable, noiseless, no vibration
- High capacity lithium battery
Specification for Curing Light
- Capability of battery: 2200mA/h  3.7V
- Input Voltage: 110-240V, AC, 50-60Hz
- Wavelength: 420-480nm
- Light power: 1500mW/cm²
- Spectrum Range: 420-480nm
- Solidify depth: 5s/3mm
- Solidify select: 5s-40s
- Battery standby time: 90 days
- Full charging to work with 10s each time, can be used continuously more than 200times
- Color: Black(we have 4 else colors, Silver/Blue/Yellow/Orange for choose.)
Packing List
- LED curing light main unit: 1 each
- Optical fiber (Curing light guide): 1 each
- Light hood: 1 each
- Charger pedestal: 1 each
- Power adapter: 1 each
- English manual: 1 each
Warranty:
- Main unit: 2 years
- Spare parts: 6 months
FDA & Shipping
Payment Mathord
Returns Policy
FAQ
About Us
FDA & Shipping
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item.
(
The seller’s name: Alisa  City: Beijing  State: Beijing    Country: China   Telephone number:
86-15898136290
)
All of our products are CE approved.
1) All items will be shipped out by e packet or Airmail in one business day.
2). The trade is cross-border and Airmail is the cheapest post way, so it take a long time for delivery. If you don't want to wait so long time, please kindly contact us for other shipping method. Meanwhile, we offer other choices in the shipping method which you can choose yourself.
3).We are not Responsible for your Customs duty.
4).We don't add taxes, VAT or other hidden charges.We are not responsiable of any Taxes.
Payment Mathord
We accept payment by
PayPal
. PayPal enables you to make payment quickly and securely online.
1: We only accept payment via PayPal.
2: Please pay the money within 5 days after the auction ended.
3: Please offer home or mobile phone when the item's Value exceeds 100 (USD, EUR, AUD, GBP) so that we can make sure you get the item safely.
Returns Policy
l    Return Policy
If you receive a defective item which you want to return, please contact us within 2 days from the day you receive the item. All return items must be returned with its original packaging and accessories. If we confirm the damage happened during the shipment, we will bear the shipping cost for return.
We will refund the money to you when we get the return items. Or replace item for you free of charge.
FAQ
Q: How can I make payment for my items?
A: We only accept payment via PAYPAL.
Q: When will the item be shipped out?
A: After full payment is received and cleared, we shipped
items within 48 hours (business days only).
Q: When can I get my items?
A: USA stock, the delivery time to USA is 3-10 days. If you don’t receive your items after 15 days, please contact us.
Chinese stock and the buyer not from USA, the delivery time is 15-28 days. If you don’t receive your items after 35 days, please contact us.
About Us
We are the manufacturer and distributor of medical equipments for more than 10 years. If you are interested in the distribution work, please feel free to contact us.
Contact information:
The seller’s name: Alisa
City: Beijing
State: Beijing
Country: China
Telephone number: 86-15898136290
SS. Medical Steam Sterilizer Sterilizition Dentist Disinfection-【2-5Day to USA】
Detail
510(k) NO. K122774
18L 110V/220V 900W Medical Steam Sterilizer Dental Lab Sterilizer Equipment
Model: 370133 370134
Specification:
CHAMBER SIZE : stainless steel #304 ; 18Liter ; (Ø)25×(D)35 CM
MACHINE SIZE : (L)58×(W)39×(H)36 CM
POWER : AC110V/900W/8A ; AC220V/900W/4A
TEMP/PRESSURE : 121℃/0.12Mpa ; 134℃/0.22Mpa
STERILIZATION TIME : 25Min / 6Min
SAFETY : Heating-over protection ; safety valve
TEMP CONTROL DESIGN : chip control
OPTIONAL ACCESSORIES :
tray basket × 1pc ; tray holder × 1pc
Sterilization tray × 3pcs ; steam exhaust pipe × 1pc
Safety equipment:
1.Pressure adjustment: adjust the inter pressure, if over standard value automatic vent
2.Avoild overheat protect device: when inter temperature overheat, power break electric current automatically.
CAUTION:
1.After the completion of disinfection。Please to wait for 10 minutes.
Before open the DOOR(Do not close the power switch and close the steam
emissions switch).
2.Before each use.Must supply water 800ml。(Distilled water is the bast).
3.Please close steam emissions switch.Before In the disinfection.
4.Do not use any corrosive or chemical water as the disinfection.
5.Do not share the same electricoutllet with other electrical apparetus.
6.Please pay attention to correct voltage and frequency.
7.Connect steam exhaust pipe with the steam vent，Before operation.
Package Includes:
1*main body
Gift:---Curing light
Features for Curing Light
- Wireless dental curing light with charging
- 5W big power LED
- With a maximum more than 1500mW/cm²
- Constant light intensity. The solidification effect is not affected by the consumption of remaining power
- Elegance design, very convenient for operationv
- Noiseless operation
- Low battery alert
- Three working models: strong, gradually strong, flashing
- Use import LED, big power, intensity and longevity, save energy
- The special design of charger base can be also used for holding the handle
- It can solidify 2-3mm deepness in a few seconds
- Can be used Worldwide 100V-240V
- With blue high sensitive brightness, can cure the resin which the wavelength of 420-480nm
- Import SMOS components, stable, noiseless, no vibration
- High capacity lithium battery
Specification for Curing Light
- Capability of battery: 2200mA/h  3.7V
- Input Voltage: 110-240V, AC, 50-60Hz
- Wavelength: 420-480nm
- Light power: 1500mW/cm²
- Spectrum Range: 420-480nm
- Solidify depth: 5s/3mm
- Solidify select: 5s-40s
- Battery standby time: 90 days
- Full charging to work with 10s each time, can be used continuously more than 200times
- Color: Black(we have 4 else colors, Silver/Blue/Yellow/Orange for choose.)
Packing List
- LED curing light main unit: 1 each
- Optical fiber (Curing light guide): 1 each
- Light hood: 1 each
- Charger pedestal: 1 each
- Power adapter: 1 each
- English manual: 1 each
Warranty:
- Main unit: 2 years
- Spare parts: 6 months
FDA & Shipping
Payment Mathord
Returns Policy
FAQ
About Us
FDA & Shipping
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item.
And
This item has been cleaned and treated according to the manufacturer's instructions.
(
The seller’s name: Alisa  City: Beijing  State: Beijing    Country: China   Telephone number:
86-15898136290
)
All of our products are CE approved.
1) All items will be shipped out by e packet or Airmail in one business day.
2). The trade is cross-border and Airmail is the cheapest post way, so it take a long time for delivery. If you don't want to wait so long time, please kindly contact us for other shipping method. Meanwhile, we offer other choices in the shipping method which you can choose yourself.
3).We are not Responsible for your Customs duty.
4).We don't add taxes, VAT or other hidden charges.We are not responsiable of any Taxes.
Payment Mathord
We accept payment by
PayPal
. PayPal enables you to make payment quickly and securely online.
1: We only accept payment via PayPal.
2: Please pay the money within 5 days after the auction ended.
3: Please offer home or mobile phone when the item's Value exceeds 100 (USD, EUR, AUD, GBP) so that we can make sure you get the item safely.
Returns Policy
l    Return Policy
If you receive a defective item which you want to return, please contact us within 2 days from the day you receive the item. All return items must be returned with its original packaging and accessories. If we confirm the damage happened during the shipment, we will bear the shipping cost for return.
We will refund the money to you when we get the return items. Or replace item for you free of charge.
FAQ
Q: How can I make payment for my items?
A: We only accept payment via PAYPAL.
Q: When will the item be shipped out?
A: After full payment is received and cleared, we shipped
items within 48 hours (business days only).
Q: When can I get my items?
A: USA stock, the delivery time to USA is 3-10 days. If you don’t receive your items after 15 days, please contact us.
Chinese stock and the buyer not from USA, the delivery time is 15-28 days. If you don’t receive your items after 35 days, please contact us.
About Us
We are the manufacturer and distributor of medical equipments for more than 10 years. If you are interested in the distribution work, please feel free to contact us.
Contact information:
The seller’s name: Alisa
City: Beijing
State: Beijing
Country: China
Telephone number: 86-15898136290