NEW STAINLESS STEE Steri-Dent Model 8376 FDA Dry Heat Sterilizer

Description

Model 8376 Power Rating: 735 Watts w/ Timer Switch
The sterilizer's timer switch serves as the ON/OFF switch. To activate the timer and turn the sterilizer on, turn the knob clockwise past the number 10. The timer can then be set for the desired time as indicated on the calibrated scale dial. To set the timer for continuous operation or warm-up, turn the knob counterclockwise to the HOLD position. WARNING: The sterilizer will remain on until it has been manually turned off or set for a timed sterilization cycle. Thermostat and Thermometer The bi-metal thermostat is used to adjust the temperature of the sterilizer. The glass thermometer on the front of the unit indicates the sterilizer’s chamber temperature. Pilot Lights The sterilizer has two pilot lights. The left light illuminates as long as the timer switch is in the ON position. The right light illuminates only while the heating elements are operating and heating the sterilization chamber. Replacement Fuses Models 8375 and 8376: Slow Blow type, rated 10A, 250V Model 8375-220: Slow Blow type, rated 5A, 250V  The fuse is located on the right side of the unit next to the power cord. SPECIFICATIONS Model Trays Tray Dimensions (WxD), inches Outside Dimensions (WxHxD), inches Inside Work Space Dimensions (WxHxD), inches Shipping Weight, pounds Power Consumption, Watts 8375 / 8375-220 2 10 x 6.25 15.5 x 10.5 x 9.5 12.5 x 5 x 7.5 17 500 8376 3 11.75 x 7.25 19 x 14.5 x 11 15 x 7.5 x 9 27 735 CLEANING Clean the inside and outside of the sterilizer with a stainless steel cleaner at least once a month. When cleaning the inside of the chamber, spray cleaner on a clean cloth first and avoid contact with heating elements. Use a wet cloth to wipe away any cleaner residue and then follow with a dry cloth to wipe dry. s NOTICE: Do not use abrasive cleaners or scouring pads to clean the Dry Heat Sterilizer